GET A COMPETITIVE QUOTE
Please enter your postcode below to get a free, no obligation, personalised quotation from PlumbProud
Please enter your postcode below to get a free, no obligation, personalised quotation from PlumbProud
Using factors such as price installed, manufacturer guarantees, energy efficiency and the likely cost of running, among others, this model has been rated as scoring 94.23% on the PlumbProud boiler benchmarking system.
We estimate that, on a standard, non-complicated installation, the supply and fitting charge for this Vaillant ecoFIT Pure 415 heat only boiler will be around £1,800.
To get a free quote for the installation of the Vaillant EcoFIT Pure 415 boiler in your home, simply enter your postcode in the box provided on this page. You can also find out whether this is the right boiler for your home by clicking to email our installation team or by calling us on 01604 343053.
Please enter your postcode below to get a personalised quotation for the perfect boiler for your home
If you’re looking for a heat only boiler for your house or flat, you may wish to the consider the Vaillant EcoFIT Pure 415.
Also known as standard boilers, regular boilers or conventional boilers, heat only boilers feature both a hot water/immersion cylinder (normally found in a utility room or landing cupboard) and a cold water tank (normally found in an attic).
Heat only boilers enable you to program in times when you want heating and hot water to be available. If you forget to set the times and there's no water left in the hot water cylinder, you may have to wait up to an hour to run a bath or shower.
If your home has more than one bathroom or you have a large family, a heat only boiler would be a good choice because it can service demand for hot water from multiple points at the same time. This is in contrast to a combi boiler which can only heat a limited volume of water at any one time meaning that, when two or more points want hot water, the water delivered is cooler and lower in both volume and pressure.
It's best to choose a boiler whose size or "output" is right for your property. With boilers, however, size does not mean how big a boiler is, it means how much power it has.
A boiler’s output indicates the amount of power it can use when heating the water which it then sends to your taps and radiators. The higher the output rate, the more water it can heat.
If a boiler’s output is too low, there will be times when your hot water might not be as hot as you want it to be. If it is too high, you’ll likely be paying more than you need to for your gas.
Measured in kilowatts, the Vaillant EcoFIT Pure 415 heat only's output level is 15 kW, so which types of property would this Vaillant ecoFIT Pure 415 heat only boiler be an appropriate choice for?
A PlumbProud heating engineer would recommend that this Vaillant ecoFIT Pure 415 heat only boiler is suitable for smaller homes and apartments with up to 10 radiators and one bathroom.
The dimensions of the Vaillant EcoFIT Pure 415 are 600 mm tall, 375 mm wide, and 295 mm deep.
The Vaillant EcoFIT Pure 415 is a condensing gas boiler - this is the type of boiler we recommend to most clients because they're better for the environment and they will save money on annual fuel bills.
A condensing boiler captures and recycles the warmth still present in both the flue exhaust gases and water vapour condensation created when gas is burned to provide your boiler with power.
This means it needs less gas to operate and it uses this extra energy to perform a number of tasks, including heating the colder water that comes back to the boiler from the radiators in your home.
How we heat our homes is an issue which many homeowners worry about as the world combats climate change and environmental damage.
Dangerous levels of nitrogen dioxide emissions in larger UK cities are caused by gas boilers in domestic properties, and 14% of the UK’s greenhouse gas production is as a result of central heating.
Will you be helping the environment if you decide to install a Vaillant EcoFIT Pure 415 heat only in your home? Let’s look at the figures.
The Vaillant EcoFIT Pure 415 has been awarded an efficiency rating of 94% and a SEDBUK band rating of "A".
In the UK, all boilers manufactured and supplied must have an energy efficiency rating of at least 92% or a SEDBUK "A" grade. Until April 2018, the minimum rating was 88% (88% and 89% are equivalent to a SEDBUK "B" rating and anything higher is rated "A").
A boiler's energy efficiency rating describes the amount of energy it uses and wastes when in normal operation.
The Energy Related Products (ERP) Directive's aim is to reduce the harmful gas emissions created during a product’s manufacture and active end use right through to its disposal.
The ERP rating for the Vaillant EcoFIT Pure 415 is "TBC".
You receive a parts and labour warranty of 2 years with the Vaillant EcoFIT Pure 415 boiler.
Powered by Gas | Gas |
Location | External |
Condensing? | Yes |
Efficiency rating | 94% |
Band rating | A |
LPG Compatible? | No |
P/L Warranty | 2 Years |
Output in kW | 15 kW |
Height | 600 mm |
Width | 375 mm |
Depth | 295 mm |
Mounting | Wall |
ERP Heat | A |
Using the Plumbproud scoring system, the current 10 ten Gas heat only boilers assessed using a number of important variables are as follows:
1 | Vaillant ecoTEC Plus 415 | 96.51% |
2 | Vaillant ecoTEC Plus 418 | 95.45% |
3 | Vaillant ecoFIT Pure 412 | 94.82% |
4 | Vaillant ecoTEC Plus 424 | 94.77% |
5 | Vaillant ecoFIT Pure 415 | 94.23% |
6 | Vaillant ecoTEC Plus 430 | 94.23% |
7 | Worcester Bosch Greenstar Ri 12Ri | 94.18% |
8 | Worcester Bosch Greenstar Ri 15Ri | 93.93% |
9 | Worcester Bosch Greenstar Ri 18Ri | 93.26% |
10 | Vaillant ecoFIT Pure 418 | 93.11% |
Choose from the UK’s biggest range of combis
The ideal boiler perfect for the largest homes
Ideal for 3+ bedroom, 2+ bathroom homes
Free, no obligation quote from our engineer
Considering lots of different factors such as price installed, manufacturer guarantees, energy efficiency, and the likely running cost, we’ve given this Vaillant ecoFIT Pure 415 heat only boiler a rating of 94.23% using our PlumbProud quality scoring system.
We would expect that, unless there are complications during fitting, this Vaillant ecoFIT Pure 415 heat only boiler would cost £1,800 supplied and professionally installed through PlumbProud.
For a free, no-obligation quotation on this Vaillant ecoFIT Pure 415 heat only boiler or for our professional advice on whether the Vaillant EcoFIT Pure 415 is suitable for your property, please call 01604 343053, click here to email our team or enter your postcode into the quotation box on this page.
Powered by Gas | Gas |
Location | External |
Condensing? | Yes |
Efficiency rating | 94% |
Band rating | A |
LPG Compatible? | No |
P/L Warranty | 2 Years |
Output in kW | 15 kW |
Height | 600 mm |
Width | 375 mm |
Depth | 295 mm |
Mounting | Wall |
ERP Heat | A |
Suitable for a house or a flat, the Vaillant EcoFIT Pure 415 heat only boiler is worth considering if you want a heat only boiler.
Heat only boilers, also known as regular or conventional boilers, need enough space for a hot water cylinder with an immersion heater (usually found in a landing cupboard) and a cold-water tank (usually found in a loft). The hot water cylinder keeps water warm and the cold water tank stores water that it passes to the hot water cylinder when required or programmed to do so.
You control how your heat only boiler works by programming it to heat water and provide central heating at the times and on the dates you choose. But if you forget to set times and dates and your hot water cylinder is empty, you may have to wait up to an hour before you have hot water again in your home.
Heat only boilers are often the best choice for a larger family or a property with multiple bathrooms as, unlike with combi boilers, there is no drop in water pressure, temperature or volume when more than one person wants hot water.
It's best to choose a boiler whose size or "output" is right for your property. With boilers, however, size does not mean how big a boiler is, it means how much power it has.
The output of a boiler is measured in kilowatts and tells you how much power it has available to heat the water it sends to your hot taps, showers and radiators. The greater the demand for hot water in your home, the larger the output you will need.
It is important to select a boiler with the optimal output rate. Choose one with too high an output and your gas bills will be too expensive. Choose one with too low an output and sometimes the water in your radiators and coming out of your taps will be barely lukewarm.
The output of the Vaillant EcoFIT Pure 415 heat only is 15 kW kilowatts, so which types of property would this be most suitable for?
A PlumbProud Gas Safe engineer would recommend that the most suitable type of property for a Vaillant EcoFIT Pure 415 heat only would be smaller homes and apartments containing up to 10 radiators and providing hot water for one bathroom.
The size of the Vaillant EcoFIT Pure 415 boiler is 600 mm high, 375 mm wide, and 295 mm deep.
This Vaillant EcoFIT Pure 415 is a condensing gas boiler - we always recommend that clients choose the latest condensing models to benefit from the technology, which continues to improve year after year.
Condensing boilers capture the heat still present in flue exhaust gases and water vapour condensation, processing them through a secondary heat exchanger to, among other tasks, heat colder water returning from your radiators.
By selecting a modern condensing boiler, you'll save money on your gas bills as well as benefitting the wider environment.
Concern for the environment is causing more and more homeowners to think about how they heat their homes and its impact on climate change.
As much as 14% of the UK’s greenhouse gas production derives from our domestic central heating systems. Gas boilers are responsible for dangerous levels of nitrogen dioxide emissions in Britain's largest cities.
Will installing a Vaillant EcoFIT Pure 415 heat only in your home be a positive contribution to the environment? The figures below will tell you more.
All boilers manufactured after April 2018 in the UK must be rated as an “A” on the SEDBUK grading system, subject to a minimum energy efficiency rating of 92% or above. Before that, the minimum rate was 88% - boilers with an energy efficiency of 88% or 89% were given a “B” rating. Boilers scoring 90% or more were given an "A" rating.
The energy efficiency rating for a boiler describes the amount of energy it uses and how much goes to waste in operation.
The Vaillant EcoFIT Pure 415 has an efficiency rating of 94% with a SEDBUK grade of "A".
The Energy Related Products (ERP) Directive is a European directive which applies to all products that consume energy over their lifetime.
It encourages companies to create products that are environmentally friendlier at all life cycle stages, including initial manufacturing and end use right through to final disposal, with the aim of reducing harmful gas emissions.
The Vaillant EcoFIT Pure 415 is rated "A".
The Vaillant EcoFIT Pure 415 boiler has a warranty covering parts and labour costs for up to 2 years after installation.
Using the Plumbproud scoring system, the current 10 ten Gas heat only boilers assessed using a number of important variables are as follows:
1 | Vaillant ecoTEC Plus 415 | 96.51% |
2 | Vaillant ecoTEC Plus 418 | 95.45% |
3 | Vaillant ecoFIT Pure 412 | 94.82% |
4 | Vaillant ecoTEC Plus 424 | 94.77% |
5 | Vaillant ecoFIT Pure 415 | 94.23% |
6 | Vaillant ecoTEC Plus 430 | 94.23% |
7 | Worcester Bosch Greenstar Ri 12Ri | 94.18% |
8 | Worcester Bosch Greenstar Ri 15Ri | 93.93% |
9 | Worcester Bosch Greenstar Ri 18Ri | 93.26% |
10 | Vaillant ecoFIT Pure 418 | 93.11% |