GET A COMPETITIVE QUOTE

Please enter your postcode below to get a free, no obligation, personalised quotation from PlumbProud

Johnson And Starley QuanTec 16 boiler

  1. Home
  2. Johnson and Starley QuanTec 16
Plumbproud rating

%

Johnson and Starley QuanTec 16 heat only Gas boiler

In our PlumbProud quality testing, this Johnson and Starley QuanTec 16 heat only boiler scores TBC%. We determine our rating based on a number of different factors including installation costs, manufacturer guarantees, energy efficiency, and operating costs.

We would expect that, unless there are complications during fitting, this Johnson and Starley QuanTec 16 heat only boiler would cost £TBC supplied and professionally installed through PlumbProud.

To receive a free quote on the Johnson And Starley QuanTec 16 and to get professional guidance and advice on whether this Johnson and Starley QuanTec 16 heat only boiler is the right choice for your home, please call us on 01604 343053, enter your postcode in the quote boxes on this page, or click here to email us.


Installed price around

£TBC

GET A COMPETITIVE BOILER QUOTE

Please enter your postcode below to get a personalised quotation for the perfect boiler for your home

Johnson and Starley QuanTec 16 heat only Gas boiler frequently asked questions

Johnson And Starley QuanTec 16 - a system boiler, regular boiler or combi boiler?

The Johnson And Starley QuanTec 16 is a heat only boiler you may wish to consider if you want this particular type of boiler for your house or flat.

Large family homes and properties with more than one bathroom benefit most from installing a heat only boiler (also referred to as a conventional boiler, a standard boiler or a regular boiler). Heat only boilers require both a cold water tank and hot water cylinder and an immersion heater. The immersion heater heats and keeps the water warm and feeds hot water to taps, radiators and other sources via the boiler.

Tell your boiler the times and days when you want hot water and central heating and it'll be there waiting for you. However, if you forget and there's no hot water left in your tank, you'll have to wait up to an hour before it's ready.

The biggest benefit of a heat only boiler is that, unlike a combi boiler, it’s possible to run two taps with hot water at the same time with no drop in pressure, volume or temperature (a known issue with combi boilers). It also means you can shower and have the dishwasher running at the same time without your water pressure being affected.

Should I install a Johnson And Starley QuanTec 16 heat only boiler in my house or apartment?

You should make sure that the boiler you install in your property is the right "size". And size doesn't mean its physical dimensions, size means how much power it has - the "output".

Output measures in kilowatts how much power a boiler can use when heating water for your radiators or taps. The higher the output rate, the more water it can heat.

If the output rate is too low, your hot water might often be only lukewarm, and if it is too high, you will be paying more for your gas than you need to.

The Johnson And Starley QuanTec 16 heat only boiler has an output of 16 kW, so which types of property would it be most appropriate for?

Most experienced boiler engineers would recommend this Johnson and Starley QuanTec 16 heat only boiler as a suitable option for smaller homes and apartments with no more than up to 10 radiators and one bathroom.


Johnson And Starley QuanTec 16 - size in millimetres

Johnson And Starley’s QuanTec 16 is TBC mm tall, TBC mm wide, and TBC mm deep.

Johnson And Starley QuanTec 16 – non-condensing or condensing?

We recommend that you choose a condensing boiler wherever possible like the Johnson And Starley QuanTec 16 - try to go for the latest model, if possible, to take advantage of improving technology.

Condensing boilers capture and recycle the warmth still present in the water vapour condensation and in flue exhaust emissions created by burning gas to make them more efficient and economical to run.

You will save money on your gas bills too, plus condensing boilers are friendlier to the environment.

Is the Johnson And Starley QuanTec 16 heat only an energy-efficient boiler?

Many homeowners are becoming increasingly concerned about how they heat their homes and the impact it has on climate change and other important environmental issues.

Central heating produces 14% of all greenhouse gas emissions in the UK. Gas boilers in the larger cities emit dangerous levels of nitrogen dioxide.

Would installing the Johnson And Starley QuanTec 16 heat only in your home be an environmentally friendly decision? Let's look closely at the figures.

The energy efficiency rating of the Johnson And Starley QuanTec 16 is 94% with a SEDBUK band rating of "A".

Energy efficiency tests record how much energy is wasted on non-core functions during an operation.

By law, all boilers manufactured and supplied in the UK must have a minimum energy efficiency performance level of 92% (equivalent to a SEDBUK "A" grade). Up to April 2018, the minimum performance level was 88% (88% and 89% are equivalent to a SEDBUK "B" grade and 90%+ an "A" grade).

In 2015, new legislation was introduced by the EU to encourage manufacturers to develop more energy-efficient products that emit fewer harmful gases throughout their lifetime.

The Energy Related Products Directive (ERP) applies to all products that consume energy, including during the manufacturing process, at the point of final disposal, and all points in between.

The ERP rating of the Johnson And Starley QuanTec 16 is "A".

What is the warranty period on a Johnson And Starley QuanTec 16 heat only boiler?

The Johnson And Starley QuanTec 16 is supplied with a parts and labour warranty of 8 years.


Johnson and Starley QuanTec 16 Gas heat only boiler specifications

Powered by GasGas
LocationExternal
Condensing?Yes
Efficiency rating94%
Band ratingA
LPG Compatible?Yes
P/L Warranty8 Years
Output in kW16 kW
MountingWall
ERP HeatA

The top 10 rated Gas heat only boilers

Using the Plumbproud scoring system, the current 10 ten Gas heat only boilers assessed using a number of important variables are as follows:

1Vaillant ecoTEC Plus 41596.51%
2Vaillant ecoTEC Plus 41895.45%
3Vaillant ecoFIT Pure 41294.82%
4Vaillant ecoTEC Plus 42494.77%
5Vaillant ecoFIT Pure 41594.23%
6Vaillant ecoTEC Plus 43094.23%
7Worcester Bosch Greenstar Ri 12Ri94.18%
8Worcester Bosch Greenstar Ri 15Ri93.93%
9Worcester Bosch Greenstar Ri 18Ri93.26%
10Vaillant ecoFIT Pure 41893.11%

Combi boilers

Choose from the UK’s biggest range of combis

Heat only boilers

The ideal boiler perfect for the largest homes

System boilers

Ideal for 3+ bedroom, 2+ bathroom homes

Boiler quote

Free, no obligation quote from our engineer

Johnson And Starley QuanTec 16 boiler

We will not be beaten on price -
ask us about our PRICE GUARANTEE!

Johnson and Starley QuanTec 16 heat only Gas boiler

  1. Home
  2. Johnson and Starley QuanTec 16
Plumbproud rating for this boiler
TBC%

We have rated this Johnson and Starley QuanTec 16 heat only boiler at TBC% using the PlumbProud quality scoring system. To determine a rating, we weigh up a number of important considerations including the energy efficiency, estimated running costs, manufacturer's warranty, price of the boiler and more.

You should budget approximately £TBC for the supply and installation of this Johnson and Starley QuanTec 16 heat only boiler on a standard, non-complicated fit.

Please enter your postcode in the quote boxes on this page, email us, or call us on 01604 343053 to get a free quote and guidance on whether the Johnson And Starley QuanTec 16 boiler is the right choice for your home.


Installed price guideline
£TBC

Get your free quote

Johnson and Starley QuanTec 16 Gas heat only boiler specifications

Powered by GasGas
LocationExternal
Condensing?Yes
Efficiency rating94%
Band ratingA
LPG Compatible?Yes
P/L Warranty8 Years
Output in kW16 kW
MountingWall
ERP HeatA

Johnson and Starley QuanTec 16 heat only Gas boiler frequently asked questions

Johnson And Starley QuanTec 16 - a system boiler, regular boiler or combi boiler?

Looking for a gas heat only boiler for your flat or house? Then the Johnson And Starley QuanTec 16 may be an option you should consider.

You can program a heat only boiler (sometimes called a standard boiler, a regular boiler or a conventional boiler) to provide hot water and heating at particular times of the day. Heat only boilers consist of a cold water tank (often housed out of sight in the loft), a hot water cylinder with an immersion heater (normally situated in an airing or landing cupboard), and a control panel.

Regular boilers are best suited for large households with many members, at least two of whom often need hot water at the same time.

Is a Johnson And Starley QuanTec 16 heat only boiler suitable for my apartment or house?

It's best to choose a boiler whose size or "output" is right for your home.

The more hot water and heat you want, the higher the output level of your boiler should be. Output is measured in kilowatts and it describes the maximum level of power your boiler has to heat water.

If your output level is too low, your boiler will not have the power it needs to get your water as hot as you want it, particularly when there's a lot of demand for it. Choose a boiler whose output level is too high and you'll have all the hot water you need but will be paying too much for it through higher gas bills.

Which types of property would this Johnson and Starley QuanTec 16 heat only boiler be appropriate for given its output of 16 kW?

Most experienced heating engineers would likely recommend that, at this level of output, this Johnson and Starley QuanTec 16 heat only boiler would be a suitable choice for smaller homes and apartments with up to 10 radiators and one bathroom.


What are the proportions of a Johnson And Starley QuanTec 16 boiler?

Johnson And Starley’s QuanTec 16 is TBC mm tall, TBC mm wide, and TBC mm deep.

Johnson And Starley QuanTec 16 – condensing or non-condensing?

Condensing boilers like the Johnson And Starley QuanTec 16 improve energy efficiency and reduce your annual expenditure on gas.

They do this by capturing and recycling the warmth still present in water vapour condensation and flue exhaust gases to, for example, increase the temperature of the colder water returning from your radiators.

Condensing boilers are also much better for the environment because they emit fewer greenhouse gases.

How does the Johnson And Starley QuanTec 16 heat only rate environmentally?

Concern for the environment is causing more and more homeowners to think about how they heat their homes and its impact on climate change.

Nitrogen dioxide emissions in Britain's largest cities are at dangerous levels and this has been caused by gas boilers. In fact, 14% of the UK’s greenhouse gases are produced by central heating.

Would choosing a Johnson And Starley QuanTec 16 heat only help in the fight against climate change? What do the performance statistics suggest?

An energy efficiency rating of 92% or above is a legal requirement for all boilers manufactured and installed in the UK today. 92% is equivalent to a low-to-middle "A" grade on the "Seasonal Efficiency of Domestic Boilers" (SEDBUK) scale.

Energy efficiency measures how much energy a boiler uses and wastes in the course of its normal operation. The lower the waste, the lower your gas bills.

The Johnson And Starley QuanTec 16 was awarded an efficiency rating of "94%", equivalent to a "A" rating on the SEDBUK system.

The ERP (or Energy Related Products Directive) is European legislation affecting products that consume energy throughout their lifetime.

The aim is to encourage companies to create environmentally friendlier products that reduce harmful gas emissions during manufacturing and when in use by the end client, right through to their eventual disposal.

In the case of the Johnson And Starley QuanTec 16, the ERP rating is "A".

What warranty does the Johnson And Starley QuanTec 16 heat only boiler come with?

The parts and labour warranty on the Johnson And Starley QuanTec 16 lasts for 8 years.


The top 10 rated Gas heat only boilers

Using the Plumbproud scoring system, the current 10 ten Gas heat only boilers assessed using a number of important variables are as follows:

1Vaillant ecoTEC Plus 41596.51%
2Vaillant ecoTEC Plus 41895.45%
3Vaillant ecoFIT Pure 41294.82%
4Vaillant ecoTEC Plus 42494.77%
5Vaillant ecoFIT Pure 41594.23%
6Vaillant ecoTEC Plus 43094.23%
7Worcester Bosch Greenstar Ri 12Ri94.18%
8Worcester Bosch Greenstar Ri 15Ri93.93%
9Worcester Bosch Greenstar Ri 18Ri93.26%
10Vaillant ecoFIT Pure 41893.11%
Menu