GET A COMPETITIVE QUOTE

Please enter your postcode below to get a free, no obligation, personalised quotation from PlumbProud

Ideal Logic+ H15 boiler

  1. Home
  2. Ideal Logic+ H15
Plumbproud rating

83.84%

Ideal Logic+ H15 heat only Gas boiler

We have determined a rating of 83.84% for this Ideal Logic+ H15 heat only boiler using the PlumbProud quality benchmarking system. Factors used to score a boiler include its energy performance, how much it costs to run, the installation price, and how long the manufacturer's guarantee lasts.

This Ideal Logic+ H15 heat only boiler is likely to cost you £1,900 supplied and fully installed through PlumbProud, although there may be additional charges if the fit takes longer than anticipated. You will, however, receive a binding quote from us prior to starting work.

Please enter your postcode in the quote boxes on this page, email us, or call us on 01604 343053 to get a free quote and guidance on whether the Ideal Logic+ H15 boiler is the right choice for your home.


Installed price around

£1,900

GET A COMPETITIVE BOILER QUOTE

Please enter your postcode below to get a personalised quotation for the perfect boiler for your home

Ideal Logic+ H15 heat only Gas boiler frequently asked questions

Is the Ideal Logic+ H15 a system boiler, a combi boiler or a regular boiler?

Looking for a gas heat only boiler for your flat or house? Then the Ideal Logic+ H15 may be an option you should consider.

If your home has more than one bathroom or you have a large family which uses a lot of hot water, a heat only boiler (sometimes called a regular boiler, a conventional boiler or a standard boiler) is likely to be the best option for you. Heat only boilers require both a hot water or immersion cylinder and a cold water tank. Once the water in the cylinder is heated, you can use this hot water throughout the day and it can feed multiple taps and showers at the same time.

This is in contrast to a combi boiler which can only heat a limited amount of water at any one time. This can cause a problem if two or more taps and showers are being used simultaneously as the temperature, pressure and volume to all points will drop.

Heat only boilers allow you to program the times that you wish heat and hot water to be available. However, if you forget to do this and the immersion cylinder is empty, you may have to wait up to an hour before hot water becomes available again.

If your property already has a water tank and cylinder, it will nearly always be cheaper to replace like for like and not choose a different type of boiler. In addition to new pipework, you may need to replace older radiators that may be unable to cope with the higher water pressure delivered by other types of boiler.

Should I install a Ideal Logic+ H15 heat only boiler in my home?

It's best to choose a boiler whose size or "output" is right for your property. With a boiler, however, size does not mean how big the boiler is, it means how much power it has.

The amount of hot water you get from showers, bathrooms, and sinks and heat from your radiators depends on your boiler's output (measured in kilowatts). The higher the level of output, the better your home will be heated and you can be more certain that the water from your taps will be as hot as you want.

However, you must be careful. You might not get the hot water you want if your boiler output is too low. If it's too high, you'll be paying more than you need to for gas.

With the Ideal Logic+ H15 heat only's output at 15 kW, which types of property would this Ideal Logic+ H15 heat only boiler be most appropriate for?

To most experienced Gas Safe engineers, the Ideal Logic+ H15 heat only Logic+ would be most suitable for smaller homes and apartments with up to 10 radiators and one bathroom.


What are the dimensions of the Ideal Logic+ H15 boiler?

The Ideal Logic+ H15 is 700 mm [H] by 395 mm [W] by 278 mm [D] in size.

Is the Ideal Logic+ H15 non-condensing or condensing?

The Ideal Logic+ H15 boiler is a condensing gas boiler and we recommend that you select one of the latest models if possible.

Condensing boilers reduce homeowners' gas bills and are better for the environment. They do this by capturing and recycling the heat still present in the flue exhaust gases and water vapour condensation produced when boilers burn gas to generate the power they need to operate.

How energy efficient is the Ideal Logic+ H15 heat only boiler?

How we heat our homes and the damage this does to the environment has become a pressing concern for many homeowners worried about the effects and impact of climate change.

14% of the UK’s greenhouse gas production comes from central heating. In the bigger cities, gas boilers in particular are responsible for dangerous levels of nitrogen dioxide emissions.

If you decide to install a Ideal Logic+ H15 heat only in your home, will you be helping the environment with your choice? Let’s have a look at the figures.

All boilers manufactured and supplied in the UK must achieve an energy efficiency rating of at least 92% (an "A" SEDBUK grade). This is higher than the previous 88%, which was a legal requirement prior to April 2018.

The energy efficiency rating is used to work out how much energy a boiler both uses and wastes when it's switched on and working correctly - its standard functioning and operation.

The Ideal Logic+ H15 is rated as 93% energy efficient, equivalent to a "A" SEDBUK rating.

In 2015, the Energy Related Products Directive (ERP) came into force. The legislation applies to all products that consume energy - in production, during their active life, and at the point of final disposal.

The ERP was introduced to incentivise manufacturers to create products that emit fewer harmful gases with the larger aim of protecting the wider environment.

The Ideal Logic+ H15 has been awarded an ERP rating of "A".

If the Ideal Logic+ H15 heat only boiler breaks down, am I covered?

The Ideal Logic+ H15 boiler comes with a parts and labour warranty lasting 7 years.


Ideal Logic+ H15 Gas heat only boiler specifications

Powered by GasGas
LocationExternal
Condensing?Yes
Efficiency rating93%
Band ratingA
LPG Compatible?No
P/L Warranty7 Years
Output in kW15 kW
Height700 mm
Width395 mm
Depth278 mm
MountingWall
ERP HeatA

The top 10 rated Gas heat only boilers

Using the Plumbproud scoring system, the current 10 ten Gas heat only boilers assessed using a number of important variables are as follows:

1Vaillant ecoTEC Plus 41596.51%
2Vaillant ecoTEC Plus 41895.45%
3Vaillant ecoFIT Pure 41294.82%
4Vaillant ecoTEC Plus 42494.77%
5Vaillant ecoFIT Pure 41594.23%
6Vaillant ecoTEC Plus 43094.23%
7Worcester Bosch Greenstar Ri 12Ri94.18%
8Worcester Bosch Greenstar Ri 15Ri93.93%
9Worcester Bosch Greenstar Ri 18Ri93.26%
10Vaillant ecoFIT Pure 41893.11%

Combi boilers

Choose from the UK’s biggest range of combis

Heat only boilers

The ideal boiler perfect for the largest homes

System boilers

Ideal for 3+ bedroom, 2+ bathroom homes

Boiler quote

Free, no obligation quote from our engineer

Ideal Logic+ H15 boiler

We will not be beaten on price -
ask us about our PRICE GUARANTEE!

Ideal Logic+ H15 heat only Gas boiler

  1. Home
  2. Ideal Logic+ H15
Plumbproud rating for this boiler
83.84%

Assessing factors including the system's running costs, its energy efficiency, the manufacturer’s guarantee, and its likely installed price, we scored this Ideal Logic+ H15 heat only boiler 83.84% on our internal PlumbProud grading system.

On a straightforward installation of this make of boiler using PlumbProud, you should expect to budget around £1,900.

For advice on whether this Ideal Logic+ H15 heat only boiler is suitable for your home or to receive a free quotation on theIdeal Ideal Logic+ H15, please call 01604 343053 to speak to one of our team. Alternatively, click here to email us or enter your postcode into the quotation box on this page.


Installed price guideline
£1,900

Get your free quote

Ideal Logic+ H15 Gas heat only boiler specifications

Powered by GasGas
LocationExternal
Condensing?Yes
Efficiency rating93%
Band ratingA
LPG Compatible?No
P/L Warranty7 Years
Output in kW15 kW
Height700 mm
Width395 mm
Depth278 mm
MountingWall
ERP HeatA

Ideal Logic+ H15 heat only Gas boiler frequently asked questions

What type of boiler is Ideal’s Logic+ H15 - system, regular or combi?

If you’re looking for a heat only boiler for your house or flat, you may wish to the consider the Ideal Logic+ H15.

Heat only boilers (often referred to as standard boilers, regular boilers or conventional boilers) need both a hot water cylinder and a cold water tank to work. The hot water cylinder heats and keeps warm the water you need and is normally installed in either a utility room or attic. The cold water tank holds water which it passes to the hot water cylinder depending on how you've programmed your boiler.

When you program a heat only boiler, you set the times and days when you want central heating and hot water to be available. However, if you don't remember to program your boiler and there's no water left in the hot water cylinder, you may have to wait up to an hour for hot water to come out of your taps.

Heat only boilers can cope with the demand for hot water from multiple taps and sources around your home simultaneously. That's why they're better for larger homes than combi boilers - combi boilers struggle when more than one hot tap is turned on. This is because they have a maximum capacity of water they can heat and distribute at any one time, meaning water pressure, temperature and volume to each tap drops.

Is the Ideal Logic+ H15 heat only boiler a suitable choice for my property?

Whether this Ideal Logic+ H15 heat only boiler is right for where you live depends on its size or "output" level. Size does not mean its physical dimensions - it means how powerful it is.

A boiler’s output is a measurement of the amount of power it can use to provide hot water to your taps and radiators. The higher its output rate, the more water it can heat.

If your new boiler’s output is too low, your hot water might not be as hot as you want it to be. If it's too high, you’ll be paying more for gas than you need to.

The output of the Ideal Logic+ H15 heat only boiler is 15 kW, so which types of property would this be appropriate for?

Most boiler engineers would recommend that a boiler with this output level would be most suitable for smaller homes and apartments with up to 10 radiators and one bathroom.


The size of the Ideal Logic+ H15 in millimetres

The Ideal Logic+ H15 measures 700 mm high and 395 mm wide by a depth of 278 mm.

Is the Ideal Logic+ H15 condensing or non-condensing?

We strongly recommend that you choose a condensing boiler like the Ideal Logic+ H15 - the technology is improving every year so the newer the boiler, the better.

A condensing boiler captures and recycles the warmth still present in flue exhaust gases and water vapour condensation into heat, allowing it to perform more efficiently on tasks like heating the colder water returning from your radiators.

They also offer significant annual savings on household gas bills as well as being more environmentally friendly.

Is the Ideal Logic+ H15 heat only boiler an environmentally friendly choice?

With environmental issues in the spotlight, more and more homeowners are becoming concerned about how they heat their homes and how much they're contributing towards combatting climate change.

Central heating systems are responsible for 14% of greenhouse gas emissions in the UK. You may also be aware that the gas boilers we use emit dangerous nitrogen dioxide in large volumes in the bigger British cities.

Would installing the Ideal Logic+ H15 heat only in your home be an environmentally friendly decision? Let's look closely at the figures.

The energy efficiency rating for a boiler describes the amount of energy it uses and wastes during operation and there are two different ways to measure it.

All boilers manufactured and supplied in the UK must have a SEDBUK rating of “A” subject to a minimum energy efficiency score of 92% or above. Before April 2018, the minimum energy efficiency score was 88% (88/89% = "B" SEDBUK rating, 90%+ = "A" SEDBUK rating).

The Ideal Logic+ H15 scored an efficiency rating of 93% and a SEDBUK band rating of A.

The ERP (Energy Related Products Directive) applies to all products that consume energy at any time in their lifetime, from manufacture to disposal and all points in between.

The intention of this European legislation is to encourage manufacturers to offer end users products that are better for the environment through the creation of fewer harmful gas emissions at all points of a product's life cycle.

The ERP rating for the Ideal Logic+ H15 is "A".

If the Ideal Logic+ H15 breaks down, will I be covered by the warranty?

The Ideal Logic+ H15 boiler comes with a parts and labour warranty lasting 7 years.


The top 10 rated Gas heat only boilers

Using the Plumbproud scoring system, the current 10 ten Gas heat only boilers assessed using a number of important variables are as follows:

1Vaillant ecoTEC Plus 41596.51%
2Vaillant ecoTEC Plus 41895.45%
3Vaillant ecoFIT Pure 41294.82%
4Vaillant ecoTEC Plus 42494.77%
5Vaillant ecoFIT Pure 41594.23%
6Vaillant ecoTEC Plus 43094.23%
7Worcester Bosch Greenstar Ri 12Ri94.18%
8Worcester Bosch Greenstar Ri 15Ri93.93%
9Worcester Bosch Greenstar Ri 18Ri93.26%
10Vaillant ecoFIT Pure 41893.11%
Menu